HP LaserJet P1102w, P1109w Firmware Update Utility

This is a firmware update utility that updates the printer firmware version to the latest. The firmware version can be found on the Self Test / Configuration page.

Windows 10 (64-bit)
Mac OS X 10.10
Mac OS X 10.11
Mac OS X 10.4
Mac OS X 10.5
Mac OS X 10.6
Mac OS X 10.7
Mac OS X 10.8
Mac OS X 10.9
Windows 10 (32-bit)
Windows 10 (64-bit)
Windows 7 (32-bit)
Windows 7 (64-bit)
Windows 8 (32-bit)
Windows 8 (64-bit)
Windows 8.1 (32-bit)
Windows 8.1 (64-bit)
Windows Server 2003
Windows Server 2008
Windows Vista (32-bit)
Windows Vista (64-bit)
Windows XP (32-bit)
Windows XP (64-bit)
macOS 10.12

Fix and enhancements:
Add support for P1109w

Note to ePrint users:
This firmware update will reset the printer's connection to the ePrint Cloud. See below for instructions on how to restore ePrint functionality after the new firmware has been installed.

Firmware Update Instructions:
NOTE: Please use a 2 meter (6 foot) USB High speed (2.0) cable.

1. Download the firmware update utility file to your desktop. Run the file.
2. Select the printer(s) you want to update from the list.
3. Select "Update All" or "Update One" button in the dialog window.
4. Following the on-screen instruction to proceed the upgrade. During the printer firmware update, the printer's LEDs will begin flashing.
5. Do NOT power cycle the printer or the PC during this process, or the printer may become unstable and/or unusable without further attention from HP. The firmware update can take several minutes to complete. Please be patient.
6. To verify the update, a configuration page can be printed. The configuration page will display the current firmware revision in the product information section.

Notes: If the firmware was already up to date, firmware was not altered. Otherwise, the Utility will display a dialog box at the conclusion of the successful firmware download indicating the download is complete.

To restore ePrint functionality:
1. Access the Embedded Web Services (EWS) by entering the IP address of your device in your web browserӳ address bar.
2. Select on the HP Web Services tab.
3. Select the button to remove Web Services.
4. Select the button to enable Web Services.
5. Print the information sheet to get the new ePrint printer code for your device.
6. Go to www.hpeprint.com.
7. Sign in to your ePrint account.
8. Select ԁdd a PrinterԠto your Account.
9. Enter the new printer code for your device (from the information sheet).
10. Enter a new customized email address.
NOTE: Your previous customized email address may be unavailable. If that occurs, please choose a new customized email address or enter your old customized email address and choose from one of the suggestions presented.
11. Change your ePrint settings as needed.


No comments:

Post a Comment